I have collected a lot of desirable metallographic sample making consumables on weekdays, including you who are meticulous in planning, you who have difficulty choosing, and you who are hesitant to place an order. As the New Year approaches and the Nanjing Chain Nengjia New Year Festival begins, there are multiple imported metallographic consumables that are easy to use and cost-effective. Quickly follow the Chain Nengjia editor to see if there are any laboratory metallographic sample making consumables that you like!

    How can the first step of metallographic sample making be cutting without metallographic cutting pieces? The original imported QMAXIS (pulse) grinding wheel cutting blades from the United States are used for metallographic grinding wheel cutting machines, with excellent manufacturing technology and high reputation. High cutting accuracy, fast speed, small plastic deformation, good cutting surface quality, and long service life are typical characteristics of QMAXIS (pulse) grinding wheel cutting blades. Full coverage of various hardness ranges!

     The second step of metallographic sample making is inlay, and hot or cold inlay can be selected according to different materials. However, regardless of the mounting method chosen, it is still necessary to choose a user-friendly mounting material.


The original imported QMAXIS (Kemai) hot pressing inlay powder from the United States is suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.


Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.

     The third step of metallographic sample preparation is grinding and polishing, and the success of the sample depends on this crucial step of grinding and polishing. Therefore, it is crucial to choose appropriate metallographic polishing consumables. There are many types and complete specifications of QMAXIS metallographic polishing consumables in the United States, and there is always one that you need.


The original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States has strong toughness, good water resistance, uniform, dense and sharp distribution of silicon carbide particles, and high grinding rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.


The original imported QMAXIS (Kemai) fine polishing suspension from the United States is an excellent nanoscale oxide polishing material, suitable for both mechanical polishing and chemical mechanical polishing; It meets both manual polishing and automatic polishing. Used in conjunction with polishing cloth to remove the deformation layer of the material and fully reproduce the microstructure of the material!


The metallographic consumables shared above are just the tip of the iceberg at Nanjing Chain Energy Home. We have created our own inventory reserve and supply center for metallographic consumables, with complete categories and specifications of cutting, inlaying, grinding, polishing, etc., and sufficient inventory to meet various customer needs. So, when is it better not to purchase metallographic sample making consumables at this time?