Recently, the editor of Lianneng found that many friends have made a significant change in choosing metallographic sample making consumables: they no longer pursue so-called big brands, but also turn practicality into daily use.


After all, we deal with various materials, samples, metallographic consumables, etc. every day in the laboratory. From cutting to inlaying to polishing, regardless of the step, in most cases, the success of the sample depends on the use of metallographic consumables. So, it is still important to choose the type of metallographic consumables.


Today, the editor of Chain Energy will bring you practical imported QMAXIS metallographic consumables from the laboratory. After personal use by our engineers and unanimous praise from new and old customers, the details are as follows:


QMAXIS metallographic consumables: diamond&CBN cutting blades, ultra-thin grinding wheel cutting blades, grinding wheel cutting blades

     The original imported QMAXIS (Kemai) ultra-thin grinding wheel cutting blades are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incision, small deformation, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.


The original imported QMAXIS (pulse) grinding wheel cutting blades from the United States are used for metallographic grinding wheel cutting machines, with excellent manufacturing technology and high reputation. High cutting accuracy, fast speed, small plastic deformation, good cutting surface quality, and long service life are typical characteristics of QMAXIS (pulse) grinding wheel cutting blades. Full coverage of various hardness ranges!


QMAXIS metallographic consumables: hot pressing inlay powder, cold inlay resin, and curing agent

    The original imported QMAXIS (Kemai) hot pressing inlay powder from the United States is suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.


Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


Grinding and polishing consumables for QMAXIS metallographic consumables: metallographic sandpaper, metallographic polishing cloth, diamond polishing fluid

     The original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States has strong toughness, good water resistance, uniform, dense and sharp distribution of silicon carbide particles, and high grinding rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.


The original imported QMAXIS (pulse) polishing fabric from the United States is made of various excellent polishing fabrics such as woven fabric, non-woven fabric, flocked fabric, chemical corrosion resistant synthetic materials, etc. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


Original imported QMAXIS (Kemai) diamond polishing fluid from the United States, available in single crystal and polycrystalline form; Water based and oil based; Various models including concentrated and mixed are available. Both manual and automatic polishing are applicable. QMAXIS (Kemai) diamond polishing fluid has a high grinding rate and good surface consistency, allowing for both speed and quality in the grinding and polishing of metallographic specimens!


The above is what the editor of Lianneng wants to share with everyone today, which is a list of practical metallographic consumables in the laboratory. If you are currently worried about choosing which metallographic consumables, if you happen to have a need to purchase metallographic consumables at the moment, and if you happen to see today's sharing of QMAXIS (Kemai) metallographic consumables, the editor of Lianneng believes that you can choose Nanjing Lianneng Home and choose QMAXIS (Kemai) metallographic consumables without hesitation!