Hello! The new week has started again. Are you all ready to start the week's work? Have all the necessary metallographic consumables for the laboratory been prepared?


Remembering that when we were doing sample cutting before, we always had a hot head and blindly bought a lot of cutting consumables, which made it easy to believe" Roadside merchants; Through various promotions, it was found that most of them were not useful and a few were not easy to use


In order to prevent everyone from stepping on lightning and discovering that this is not useful only after arriving at the laboratory, the consumables are not available. Today, the editor of Chain Neng will recommend some laboratory cutting consumables, which are all six QMAXIS (Kemai) metallographic cutting consumables that our engineers have personally used and reported to be truly useful and cost-effective!


Cutting consumables one: diamond&CBN cutting blades

     The original imported QMAXIS (Kemai) diamond&CBN cutting blades from the United States are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively, with their axis diameters. Diamond&CBN cutting blades have high hardness and thin thickness, resulting in fast cutting speed, less material wear, and minimal surface deformation, which is more conducive to subsequent grinding and polishing. The service life of cutting blades is longer than that of other materials, and the converted comprehensive cutting cost is relatively lower. Diamond&CBN cutting pieces with different concentration, particle size and bonding process can meet the cutting requirements of different materials, and are very awesome cutting pieces for metallographic specimen cutting!


&Flash& Flash; Diamond&CBN cutting blades with an axial aperture of 12.7mm: 3in, 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Diamond cutting blade with an axial aperture of 32mm: 10in


Cutting consumables 2: ultra-thin grinding wheel cutting blades


The original imported QMAXIS (Kemai) ultra-thin grinding wheel cutting blades are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incision, small deformation, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 12.7mm: 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 32mm: 10in, 12in


Cutting consumables three: grinding wheel cutting blades

     The original imported QMAXIS (pulse) grinding wheel cutting blades from the United States are used for metallographic grinding wheel cutting machines, with excellent manufacturing technology and high reputation. High cutting accuracy, fast speed, small plastic deformation, good cutting surface quality, and long service life are typical characteristics of QMAXIS (pulse) grinding wheel cutting blades. Full coverage of various hardness ranges!


&Flash& Flash; 10 inch grinding wheel cutting blade


&Flash& Flash; 12 inch grinding wheel cutting blade


Cutting consumables 4: diamond cup grinding wheel


The original imported QMAXIS diamond cup grinding wheel from the United States can be installed on precision cutting and grinding integrated machines, thin sample cutting and grinding systems from different manufacturers, as well as lithofacies precision cutting machines. It is matched with diamond cutting blades to cut, grind and exchange between various steps, thus completing special thin sample preparation. (4in, 6in, 8in)


Cutting consumables 5: cutting cooling lubricant

     The original imported QMAXIS cutting cooling lubricant from the United States is available in both water-based and oil-based versions, with rust prevention function. Cutting cooling lubricant not only helps to dissipate heat and achieve good cutting efficiency of the cutting blade, but also can quickly remove cutting debris from the cutting point, avoiding unnecessary scratches on the surface of the sample caused by cutting debris.


&Flash& Flash; Coolant water-based cutting cooling lubricant


&Flash& Flash; Oil Coolant oil-based cutting cooling lubricant


Cutting consumables six: grinding stones


The original imported QMAXIS (pulse) grinding stone from the United States is used for repairing new and used diamond and CBN cutting pieces. After being polished by grinding stones, diamond and CBN cutting pieces can not only remove residual cutting debris on the surface of the cutting pieces, but also quickly restore the flatness and sharpness of the cutting pieces, improve cutting quality, and extend the service life of the cutting pieces.


&Flash& Flash; Alumina grinding stone


Six cost-effective cutting consumables that are essential for the laboratory are recommended here, all carefully selected by the Chain Energy editor. Dear friends, you can prepare as needed!