The American QMAXIS (Kemai) metallographic sample making consumables are more user-friendly and practical. The beginning of autumn is approaching, and the summer has not yet arrived. Welcome all new and old customers to visit Lianneng Metallographic Experimental Equipment Nanjing Co., Ltd. We recommend QMAXIS (Kemai) metallographic sampling consumables in the United States in August, as scheduled.


Six commonly used metallographic sample making consumables for laboratories, including cutting, inlaying, and polishing, are detailed as follows:

     The original imported QMAXIS (Kemai) diamond&CBN cutting blades from the United States are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. Diamond&CBN cutting blades have high hardness and thin thickness, resulting in fast cutting speed, less material wear, and minimal surface deformation, which is more conducive to subsequent grinding and polishing. The service life of cutting blades is longer than that of other materials, and the converted comprehensive cutting cost is relatively lower. Diamond&CBN cutting pieces with different concentration, particle size and bonding process can meet the cutting requirements of different materials, and are very awesome cutting pieces for metallographic specimen cutting!

     Original imported QMAXIS (Kemai) hot pressing inlay powder from the United States: suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.

     Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States: including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.

     Original imported QMAXIS (Kemai) silicon carbide sand metallographic sandpaper from the United States: paper based with strong toughness, good water resistance, uniform and dense distribution of silicon carbide particles, sharp, and high grinding rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.

     Original imported QMAXIS (Kemai) metallographic polishing fabric from the United States: made of various excellent polishing fabrics such as woven fabric, non-woven fabric, flocked fabric, chemical corrosion resistant synthetic materials, etc. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.

     Original imported QMAXIS (Kemai) fine polishing suspension from the United States: excellent nanoscale oxide polishing material, suitable for both mechanical polishing and chemical mechanical polishing; It meets both manual polishing and automatic polishing. Used in conjunction with polishing cloth to remove the deformation layer of the material and fully reproduce the microstructure of the material!


A user-friendly metallographic sample making consumable, let's leave the trouble of metallographic sample making for now. QMAXIS metallographic sample making consumables from the United States have a wide variety and complete specifications, which can always meet your sample making needs. Nanjing Chain Nengjia has a professional team of engineers who can provide you with professional technical support in equipment configuration, consumables selection, and other aspects. So, feel free to choose!