This year's 618 is a good time for laboratories to purchase metallographic consumables. In the past period, due to the impact of domestic and international epidemics, the prices of metallographic consumables have been unstable. Recently, various aspects have been slowly recovering, and various industries are about to return to normal, coinciding with the annual 618. So, friends who want to purchase metallographic consumables, don't miss this wave of wool!


When it comes to metallographic consumables, of course, it is important to choose ones that have good sample preparation results and high cost-effectiveness. In recent years, there have been a variety of brands and types of metallographic consumables on the market, and everyone is dazzled by their choices. On the occasion of 618, Chaineng editor will introduce these 5 QMAXIS metallographic consumables to you. It's very cost-effective to buy them now!

    QMAXIS Metallographic Consumables 1: Original imported QMAXIS (pulse) grinding wheel cutting blades from the United States, used for metallographic grinding wheel cutting machines, with excellent manufacturing technology and high reputation. High cutting accuracy, fast speed, small plastic deformation, good cutting surface quality, and long service life are typical characteristics of QMAXIS (pulse) grinding wheel cutting blades. Full coverage of various hardness ranges!

    QMAXIS metallographic consumables 2: Original imported QMAXIS (Kemai) hot pressing inlay powder from the United States, suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.

     QMAXIS metallographic consumables three: original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.

    QMAXIS metallographic consumables 4: Original imported QMAXIS (Kemai) silicon carbide sandpaper from the United States, with strong toughness and good water resistance, uniform, dense and sharp distribution of silicon carbide particles, and high grinding rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.

     QMAXIS metallographic consumables 5: original imported QMAXIS (Kemai) diamond polishing fluid from the United States, available in single crystal and polycrystalline form; Water based and oil based; Various models including concentrated and mixed are available. Both manual and automatic polishing are applicable. QMAXIS (Kemai) diamond polishing fluid has a high grinding rate and good surface consistency, allowing for both speed and quality in the grinding and polishing of metallographic specimens!


Today, the editor of Chain Energy introduced these 5 QMAXIS metallographic consumables to everyone. The selection was based on the cutting, embedding, and polishing of the samples. We tried to choose several commonly used and well received samples in the laboratory, and also considered different choices under different budgets. Please select the suitable purchase according to your own needs for those in need!