Why are samples always not made well? Why is work efficiency always so low? Why do samples made by others always receive recognition and appreciation from leaders? Follow the editor of Chain Energy to have a detailed understanding of these three highly praised metallographic consumables, perhaps you can find the answer.
NO.1: American QMAXIS ultra-thin grinding wheel cutting blade

     The axis aperture is suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incisions, minimal damage, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 12.7mm: 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 32mm: 10in, 12in


NO.2: American QMAXIS cold embedding resin and curing agent

     Including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes


NO.3: American QMAXIS metallographic polishing cloth

     Made of high-quality polished fabrics such as woven fabrics, non-woven fabrics, flocked fabrics, and chemically resistant synthetic materials. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


&Flash& Flash; Coarse throwing: PlanCloth, PerfoCloth, NylonCloth


&Flash& Flash; Middle throw: DuraCloth, SatinCloth, SilkCloth


&Flash& Flash; Fine polishing: MicroMet, VelCloth, FlocCloth, ChemoCloth


The above are three metallographic consumables with high buyback and positive reviews from everyone. They are not only easy to use, but also have a high cost-effectiveness. They are truly essential treasures for laboratory metallographic sample making consumables. If you have a little trouble with sample making at the moment, why not come to Nanjing Chain and try these American QMAXIS metallographic consumables!