Why is there such a big gap between people who are also human? Also working in the laboratory and preparing samples, why is the difference between the samples produced so large? The fundamental reason is due to ideological deviation; It is due to poor selection of consumables.


As the saying goes, nothing is difficult in the world, only those who have a heart. As long as you put your heart into anything, you can overcome difficulties. Others have already started using QMAXIS metallographic consumables imported from the United States for sample preparation, while you are still standing still. If we don't take action yet, the gap is destined to widen. So, if you are using these three metallographic consumables from QMAXIS in the United States, congratulations! It means you have made progress compared to others!

     Metallographic sample preparation consumables 1: Original imported QMAXIS (Kemai) hot pressing inlay powder from the United States, suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.


&Flash& Flash; PhenoPowder phenolic resin


&Flash& Flash; EpoPowder G epoxy resin (particles)


&Flash& Flash; EpoPowder F epoxy resin (powder)


&Flash& Flash; TransPowder acrylic resin


&Flash& Flash; MelaPowder melamine resin


&Flash& Flash; CopperPowder Copper Conductive Filler


&Flash& Flash; GraphPowder carbon conductive filler

     Metallographic Sample Preparation Consumables 2: Original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States, with strong toughness and good water resistance, uniform, dense, sharp distribution of silicon carbide particles, and high removal rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.


&Flash& Flash; CarbiPaper with adhesive backing silicon carbide sandpaper


&Flash& Flash; CarbiPaper without backing adhesive, silicon carbide sandpaper

     Metallographic sample preparation consumables three: original imported QMAXIS (Kemai) diamond polishing fluid from the United States, available in single crystal and polycrystalline form; Water based and oil based; Various models including concentrated and mixed are available. Non toxic, environmentally friendly, suitable for both manual and automatic polishing.


QMAXIS (Kemai) diamond polishing solution has a high removal rate and good surface consistency, allowing for both speed and quality in the grinding and polishing of metallographic specimens!


&Flash& Flash; PolyDia water-based polycrystalline diamond polishing fluid


&Flash& Flash; MonoDia water-based single crystal diamond polishing solution


&Flash& Flash; ComboDia water-based single crystal diamond mixed polishing solution


&Flash& Flash; OilDia oil-based single crystal diamond polishing fluid


As the saying goes, 'no profit, no rise early.' Behind every occurrence lies the reason for its existence. Just like the American QMAXIS (Kemai) metallographic consumables, so many people use them and have gained everyone's trust, which is also for its reasons. So, I think you, who are smart, will definitely choose it!