This year, I learned and made metallographic samples with the company's engineers, and also went to some laboratories for cutting, inlaying, polishing

     I happen to have a bit of an occupational disease, and I like to visit people's laboratories wherever I go. What kind of samples are placed inside and what metallographic sampling consumables are used. I went to many laboratories and found that the consumables and brands used by everyone are quite different. Some prefer to use domestically produced products, some prefer to use imported products, and some mix domestically produced and imported products. However, both domestically produced and imported products have one thing in common, which is their ease of use and high cost-effectiveness.


Lianneng Metallographic Experimental Equipment Nanjing Co., Ltd. has its own laboratory, and its original imported QMAXIS metallographic consumables from the United States have collaborated with multiple well-known enterprises. Whether it is sample preparation quality or cost-effectiveness, it is comfortable to use and reliable to buy, and can meet all the needs of laboratory metallographic sample preparation. If you want to learn about QMAXIS metallographic consumables in the United States, you may as well continue to read on!


01: American QMAXIS ultra-thin grinding wheel cutting blade

    The original imported QMAXIS (Kemai) ultra-thin grinding wheel cutting blades are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incisions, minimal damage, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 12.7mm: 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 32mm: 10in, 12in


02: QMAXIS Cold Inlay Resin and Curing Agent in the United States

     Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes


03: American QMAXIS metallographic polishing cloth

     The original imported QMAXIS polishing fabric from the United States is made of high-quality polishing fabrics such as woven fabric, non-woven fabric, flocked fabric, chemical corrosion resistant synthetic materials, etc. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


&Flash& Flash; Coarse throwing: PlanCloth, PerfoCloth, NylonCloth


&Flash& Flash; Middle throw: DuraCloth, SatinCloth, SilkCloth


&Flash& Flash; Fine polishing: MicroMet, VelCloth, FlocCloth, ChemoCloth


The above are some of the American QMAXIS (Kemai) metallographic sample making consumables that the editor wants to share today. I don't know which ones everyone has used, is it the same as the editor's feeling, low-key, easy to use, and cost-effective! Chaineng editor believes that as long as you have used it, you will definitely love American QMAXIS (Kemai) metallographic sample making consumables even more.