&Ldquo; Break and part” What exactly does it mean? Is it just throwing things away? No, it's not true. This concept was originally proposed by Japanese debris manager Yingko Yamashita. Cut it out. When shopping, think twice and only add suitable, comfortable, and necessary items. Abandoning, abandoning things that are useless and of poor quality. Leaving, breaking away from the obsession with material possessions, allows oneself to be in a more comfortable space.


This also applies to the metallographic consumables that need to be used every day in the laboratory. When we discard or eliminate those unsuitable, poor quality, and worrisome metallographic consumables, from a new perspective, we can choose several high-quality metallographic sample making consumables that are both economical and easy to use. Not only can we optimize our laboratory, but we are also responsible for ourselves and our customers, and we can also avoid falling into a vicious cycle of buying, buying, and repeating.


Today, the editor of Chain Energy wants to share with you the engineers from Chain Energy Laboratory; Break and part” The three types of metallographic consumables that cannot be discarded are as follows:

    Metallographic consumables 1: Original imported QMAXIS (Kemai) diamond&CBN cutting blades from the United States, with axial aperture suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. Diamond&CBN cutting blades have high hardness and thin thickness, resulting in fast cutting speed, minimal material removal, and minimal surface damage, making them more conducive to subsequent grinding and polishing. The service life of cutting blades is longer than that of other materials, and the converted comprehensive cutting cost is relatively lower. Diamond&CBN cutting pieces with different concentration, particle size and bonding process can meet the cutting requirements of different materials. They are very awesome cutting pieces in the first step of metallographic sample preparation!


&Flash& Flash; Diamond&CBN cutting blades with an axial aperture of 12.7mm: 3in, 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Diamond cutting blade with an axial aperture of 32mm: 10in

    Metallographic consumables 2: Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes

    Metallographic consumables 3: The original imported QMAXIS (Kemai) metallographic polishing fabric from the United States is made of high-quality polishing fabrics such as woven fabrics, non-woven fabrics, flocked fabrics, and chemical corrosion resistant synthetic materials. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


&Flash& Flash; Coarse throwing: PlanCloth, PerfoCloth, NylonCloth


&Flash& Flash; Middle throw: DuraCloth, SatinCloth, SilkCloth


&Flash& Flash; Fine polishing: MicroMet, VelCloth, FlocCloth, ChemoCloth


Break up and choose what you just need; Choose high-quality and cost-effective items; Shopping can enhance one's own things, and I hope everyone can choose good things that they cannot bear to part with!