There are no holidays in August or September&hellip& Hellip; Are many people at work so skeptical about life. Since we can't go out and relax, we need to take care of ourselves even more.


Chaineng editor provides you with a wave of useful and cost-effective metallographic sample making consumables, which can definitely be used in the laboratory. The happiness of work during this period depends entirely on them!

     Cutting sampling is the first step in metallographic sample preparation, and it is particularly important to choose the type of cutting piece. The QMAXIS grinding wheel cutting blade is imported from the United States with original packaging and is a specialized cutting blade for metallographic grinding wheel cutting machines. The manufacturing process is exquisite and the reputation is high. High cutting accuracy, fast speed, small plastic deformation, good cutting surface quality, and long service life are typical characteristics of QMAXIS (pulse) grinding wheel cutting blades. Full coverage of various hardness ranges! There are two sizes to choose from: a 10 inch grinding wheel cutting blade and a 12 inch grinding wheel cutting blade.


The quality of sample inlay is directly related to the subsequent polishing, so the choice of inlay method and which inlay consumables are also crucial. Chain energy home inlay consumables include two types: hot inlay and cold inlay, as follows:

     The original imported QMAXIS (Kemai) hot pressing inlay powder from the United States is suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.


&Flash& Flash; PhenoPowder phenolic resin


&Flash& Flash; EpoPowder G epoxy resin (particles)


&Flash& Flash; EpoPowder F epoxy resin (powder)


&Flash& Flash; TransPowder acrylic resin


&Flash& Flash; MelaPowder melamine resin


&Flash& Flash; CopperPowder Copper Conductive Filler


&Flash& Flash; GraphPowder carbon conductive filler


Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes


After completing the cutting and inlaying, the next step is particularly important grinding and polishing. The grinding and polishing of the sample is divided into three steps: coarse grinding, fine grinding, and polishing. Each step of the process is very important. To ensure the quality of grinding and polishing, it is crucial to choose the type of metallographic grinding and polishing consumables.

     The original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States has strong toughness, good water resistance, uniform, dense and sharp distribution of silicon carbide particles, and high removal rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.


&Flash& Flash; CarbiPaper with adhesive backing silicon carbide sandpaper


&Flash& Flash; CarbiPaper without backing adhesive, silicon carbide sandpaper


The original imported QMAXIS (Kemai) metallographic polishing fabric from the United States is made of high-quality polishing fabrics such as woven fabrics, non-woven fabrics, flocked fabrics, chemical corrosion resistant synthetic materials, etc. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


&Flash& Flash; Coarse throwing: PlanCloth, PerfoCloth, NylonCloth


&Flash& Flash; Middle throw: DuraCloth, SatinCloth, SilkCloth


&Flash& Flash; Fine polishing: MicroMet, VelCloth, FlocCloth, ChemoCloth


Original imported QMAXIS (Kemai) fine polishing suspension and powder from the United States, high-quality nanoscale oxide polishing materials, both suitable for mechanical polishing and chemical mechanical polishing; There are both suspensions and solid micro powders; It meets both manual polishing and automatic polishing. Used in conjunction with polishing cloth to remove the deformation layer of the material and exquisitely reproduce the microstructure of the material!


&Flash& Flash; AluminaPrep Alumina polishing suspension sol gel


&Flash& Flash; SilicaPrep silicon oxide polishing suspension pyrolysis and colloid


&Flash& Flash; Al-SiPrep Silicon Aluminum Mixed Polishing Suspension Silicon Aluminum


&Flash& Flash; CeriumPrep Cerium Oxide Polishing Suspension Colloid


&Flash& Flash; Alumina Powder Agglomerated Pyrolysis Alumina Polishing Powder


&Flash& Flash; De Alumina Powder Non Agglomerated Pyrolytic Alumina Polishing Powder


&Flash& Flash; Alumina Suspension Agglomerated Pyrolysis Alumina Polishing Suspension


&Flash& Flash; De Alumina Suspension Non Agglomerated Pyrolysis Alumina Polishing Suspension