There are many brands and types of metallographic sample making consumables. Understanding them and using them proficiently can not only improve work efficiency, but also avoid some repetitive labor. Whether it is work or study, there are many benefits!


Today, the editor of Chain Energy will introduce three useful QMAXIS metallographic consumables that you are not even aware of. I believe that after everyone understands, it will make you and your colleagues around you send out" Wow;, It turns out that there are still consumables that are so useful and cost-effective.


1、 QMAXIS Cold Inlay Resin and Curing Agent in the United States

     Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes


2、 QMAXIS Silicon Carbide Metallographic Sandpaper from the United States

     The original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States has strong toughness, good water resistance, uniform, dense and sharp distribution of silicon carbide particles, and high removal rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.


&Flash& Flash; CarbiPaper with adhesive backing silicon carbide sandpaper


&Flash& Flash; CarbiPaper without backing adhesive, silicon carbide sandpaper


3、 QMAXIS Diamond Polishing Fluid from the United States

    Original imported QMAXIS (Kemai) diamond polishing fluid from the United States, available in single crystal and polycrystalline form; Water based and oil based; Various models including concentrated and mixed are available. Non toxic, environmentally friendly, suitable for both manual and automatic polishing. QMAXIS (Kemai) diamond polishing solution has a high removal rate and good surface consistency, allowing for both speed and quality in the grinding and polishing of metallographic specimens!


&Flash& Flash; PolyDia water-based polycrystalline diamond polishing fluid


&Flash& Flash; MonoDia water-based single crystal diamond polishing solution


&Flash& Flash; ComboDia water-based single crystal diamond mixed polishing solution


&Flash& Flash; OilDia oil-based single crystal diamond polishing fluid


When making metallographic samples, there are actually many consumables that need to be used, from cutting to inlaying to polishing, each step will use different metallographic consumables. So, if you think what the editor of Chain Neng shared today is helpful to you, remember to come to Nanjing Chain Neng to make a purchase!