Today, the editor recommends an imported metallographic sandpaper to everyone.

      Since the laboratory was completely replaced with imported metallographic sandpaper of this brand, the editor has understood two things.

     1. In the past, metallographic samples often couldn't be ground out, and they were always reworked, reworked, and even sometimes the samples were worn out, requiring a new one to be made, both cut and inlaid. It was impossible to calculate how much time and effort was wasted. Also, there is the adhesive on the back of the metallographic sandpaper tape, which is left on the iron plate and is really difficult to clean. Every time I change the sandpaper, my head gets bigger and I try my best to find a solution, which is time-consuming and laborious, and I can't clean it thoroughly. The key is that the efficiency is extremely low, which greatly increases the cost of sample preparation. It's really not fun.

     The above problems can be solved by replacing high-quality imported metallographic sandpaper.

    This is the high-quality silicon carbide metallographic sandpaper from QMAXIS in the United States.

      After using the metallographic sandpaper imported from QMAXIS in the United States for the first time, the editor and colleagues around us did not experience any instances of sample grinding, rework, or wear. So, quickly recommend it to friends who do metallography.

    Do you know? Compared to ordinary metallographic sandpaper, this type of metallographic sandpaper has excellent grinding performance, good grinding quality, and is particularly fast. For the same sample, it saves half of the grinding time compared to ordinary metallographic sandpaper. It's really easy to use! It seems that the damaged layer on the surface of the sample can be felt to wear off by brushing, it's really enjoyable!

      In addition to good grinding effect and high efficiency, it is also very durable. The number of samples ground from the same metallographic sandpaper is 1.5 to 2 times that of ordinary metallographic sandpaper; In addition, there is no odor, the adhesive backing is particularly environmentally friendly, and the water resistance is also very good. The paper base will not be damaged after use.

     For metallographic analysis, using metallographic sandpaper with adhesive backing every day can be a difficult task to clean. Every time the sandpaper is replaced, the general metallographic sandpaper adhesive backing is firmly adhered to the iron plate, which can be scraped with a small knife, washed with water, or dissolved in solvent&hellip& Hellip;, Cleaning it up is very time-consuming and labor-intensive, it's too boring. This metallographic sandpaper adhesive is surprisingly easy to clean, with very little residue left after the sandpaper is removed. It can be easily removed by gently rubbing with a rubber.

     If you are still struggling with poor grinding performance of the sample, rework and redo; In the tangled tangle of clearing the adhesive, try this metallographic sandpaper imported from the United States to see if it can give you a different sample making experience.