The annual 618 is coming soon, and Chaineng editor and American QMAXIS (Kemai) metallographic sampling consumables are fully available, including cutting, inlaying, grinding, polishing, etc. There is always one that you need.



Today, the editor of Chain Energy will share with you the top list of several 618 must-have and metallographic consumables. For those who have recent procurement needs, please take a look. The details are as follows:

TOP1: The original imported QMAXIS (Kemai) ultra-thin grinding wheel cutting blades are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incision, small deformation, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.

   TOP2: Original imported QMAXIS (Kemai) hot pressing inlay powder from the United States, suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.



TOP3: Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.

    TOP4: The original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States has strong toughness, good water resistance, uniform, dense and sharp distribution of silicon carbide particles, and high grinding rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.



TOP5: Original imported QMAXIS (Kemai) diamond polishing fluid from the United States, available in single crystal and polycrystalline form; Water based and oil based; Various models including concentrated and mixed are available. Both manual and automatic polishing are applicable. QMAXIS (Kemai) diamond polishing fluid has a high grinding rate and good surface consistency, allowing for both speed and quality in the grinding and polishing of metallographic specimens!



The procurement activity for QMAXIS (Kemai) metallographic sample making consumables from the United States has officially started for Nanjing Liannengjia 618. The Liannengjia editor is waiting for you to experience and purchase together in the laboratory.