Summer is coming to an early start, and the south wind is fragrant with grass and trees. The footsteps of spring are gradually fading away, and the summer of all things is coming. As the temperature gradually increases, the summer atmosphere that comes rushing towards us becomes more and more obvious.
In this passionate early summer, Lianneng Xiaobian arrived with the QMAXIS metallographic consumables that everyone loves. Your love and recognition are the driving force for our Nanjing Lianneng family's continuous growth and progress!

    The original imported QMAXIS (Kemai) ultra-thin grinding wheel cutting blade is suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively, with its axis diameter. The thickness of ultra-thin grinding wheel cutting pieces is slightly thicker than diamond&CBN cutting pieces and slightly thinner than grinding wheel cutting pieces. This ultra-thin grinding wheel cutting blade has small incision, small deformation, high cutting efficiency, wide application range, and long service life. In many application scenarios, replacing diamond&CBN cutting blades is an effective choice for metallographic sample preparation engineers to reduce costs and increase efficiency.



&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 12.7mm: 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Ultra thin grinding wheel cutting blades with an axial aperture of 32mm: 10in, 12in

    Original imported QMAXIS (Kemai) hot pressing inlay powder from the United States: suitable for hot pressing inlay of materials that are not sensitive to temperature and pressure. Fully cured at appropriate temperature and pressure, less prone to embedded defects, and well maintained edges, making it suitable for continuous batch preparation of standard specimens.



&Flash& Flash; PhenoPowder phenolic resin


&Flash& Flash; EpoPowder G epoxy resin (particles)


&Flash& Flash; EpoPowder F epoxy resin (powder)


&Flash& Flash; TransPowder acrylic resin


&Flash& Flash; MelaPowder melamine resin


&Flash& Flash; CopperPowder Copper Conductive Filler


&Flash& Flash; GraphPowder carbon conductive filler



Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.



&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes

    Original imported QMAXIS (Kemai) silicon carbide metallographic sandpaper from the United States: paper based with strong toughness, good water resistance, uniform and dense distribution of silicon carbide particles, sharp, and high grinding rate. By grinding the metallographic sample with it, the surface scratch is small and the consistency is good, which is conducive to the subsequent polishing process and can effectively shorten the sample preparation time.



&Flash& Flash; CarbiPaper with adhesive backing silicon carbide sandpaper


&Flash& Flash; CarbiPaper without backing adhesive, silicon carbide sandpaper



The original imported QMAXIS (Kemai) fine polishing suspension from the United States is an excellent nanoscale oxide polishing material, suitable for both mechanical polishing and chemical mechanical polishing; It meets both manual polishing and automatic polishing. Used in conjunction with polishing cloth to remove the deformation layer of the material and fully reproduce the microstructure of the material!



&Flash& Flash; AluminaPrep Alumina polishing suspension sol gel, pyrolysis


&Flash& Flash; SilicaPrep polishing suspension colloid and pyrolysis


&Flash& Flash; Al-SiPrep Silicon Aluminum Mixed Polishing Suspension Silicon Aluminum


&Flash& Flash; CeriumPrep Cerium Oxide Polishing Suspension Colloid



Between this spring and summer, Nanjing Chain Nengjia extends the hand of friendship to you. In this May agreement, QMAXIS (Kemai) metallographic consumables from the United States will go with everyone!