Are you a metallographic analysis engineer? Are you busy in the metallographic laboratory every day? Cutting, inlaying, grinding? Especially for grinding, it is a process of repeated repetition. Metallographic sandpaper is one of the main grinding consumables, and whether it is coarse or fine grinding, this process is really a crucial step. A good metallographic sandpaper can not only make grinding easier, but also quickly remove the deformation layer on the grinding surface, saving time and effort, making it super user-friendly; The back glue is easy to clean; Good storage and long shelf life. Do you want to use metallographic sandpaper in your laboratory that understands you so well?

The editor believes you must have guessed correctly! Today, I will introduce you the metallographic sandpaper that understands you so well, and see if it is what you want?
Look at this metallographic sandpaper, which is standard circular and has diameters of 8 inches, 10 inches, and 12 inches. It also has a diameter of 3 inches suitable for use with Mini polishing machines. Minimal plain color, very textured. It is the original imported silicon carbide metallographic sandpaper from the United States.

This metallographic sandpaper grinding medium is silicon carbide particles, with a dense and uniform distribution of grinding particles, which has excellent grinding performance and does not damage the surface of the sample. The deformation layer, burrs, etc. on the surface of the sample will be easily ground and thrown away without leaving any traces. Whether your metallographic sample is hard, soft, fragile, brittle, or any other material with a texture, this metallographic sandpaper can easily handle and grind to an ideal surface.
From coarse to fine metallographic sandpaper, different combinations of coarse and fine can form different grinding and polishing schemes, suitable for the sample preparation requirements of different materials, until a satisfactory sample surface is ground.

This metallographic sandpaper can be used for both manual and automatic grinding. When grinding, only water is needed. After use, rinse thoroughly with clean water and place it on a drainage rack. No matter how you grind, as long as the operation method is appropriate, the surface deformation layer of the sample can be easily removed, providing a good grinding surface for subsequent metallographic polishing.
This metallographic sandpaper not only has strong grinding ability, but also has a very easy cleaning of the adhesive on the back. The remaining adhesive on the iron plate can be wiped clean with rubber or soft cloth, and then rinsed with clean water. Temporarily unused sandpaper can be placed in a storage cabinet, kept away from light and dry, and can be used normally for three years. This metallographic sandpaper is so easy to use, clean, and store. Do I really understand you!