-
Distributive Center of Metallographic Sample Preparation Consumables
Supply Chain of Metallographic Machines, Hardness Testers and Microscopes
-
(86)-186-0049-7749
info@linkenergy.cn
2944149229
Distributive Center of Metallographic Sample Preparation Consumables
Supply Chain of Metallographic Machines, Hardness Testers and Microscopes
(86)-186-0049-7749
info@linkenergy.cn
2944149229
Hotline: (86)-186-0049-7749
E-mail: info@linkenergy.cn
QQ: 2944149229
Tel: (86-25)-8622-2679
Fax: (86-25)-8653-2679
Address: Room 711-498, No. 116, Suo Street, Jianye District, Nanjing China 210000
Leica DMS300 is a digital microscope system equipped with an HDMI display instead of an eyepiece. Because Leica DMS300 can obtain color images and up to 30fps full HD movies, users can benefit from fast real-time image display and acquisition.
The Leica DMS300 is an independent digital microscopy system equipped with an 8:1 optical zoom and a 2.5MP camera. Produce high-quality, full-color still images and high-definition movies, allowing users to see and record their work.
Order Hotline：(86)-186-0049-7749
| Leica 3D Video Microscope - Leica DMS300 Performance | ||
| • With complete HDMI output • Output high-quality, full-color still images, as well as full high-definition images • High quality 8:1 zoom optical device combined with a 2.5MP camera, providing full high-definition real-time images up to 30fps • Control through wireless remote control, can be connected to a computer, compatible with Leica software LAS EZ, dual real-time video streaming can be achieved through HDMI interfaces, such as high-definition monitors or high-definition projectors, to simultaneously output to a PC and a second imaging device • Easy to verify and archive • Digital microscope system, combined with excellent optical system and advanced digital camera, adopts HDMI display, provides two-dimensional images instead of eyepiece, so that users can see and record their work • Adopting ergonomic design for good comfort and easier operation | 
| |
| Leica 3D Video Microscope - Leica DMS300 Technical Parameters | ||
| system | Leica DMS300 Technical Parameter | |
| Camera specifications | ||
| Resolution (real-time image) | HD Ready | 1280x720-50Hz/60Hz-30fps |
| FULL HD | 1920x1080-50Hz/60Hz/25Hz/30Hz-30fps | |
| PC | 1600x1200-10fps/1024x768-24fps | |
| Resolution (single image) | 2.5 million pixels（1824x1368） | |
| 1.1 million pixels（1216x912） | ||
| Resolution (video clip) | HD1080(1920x1080) | |
| HD720(1280x720) | ||
| Pixel size (resolution) | 2.35μmx2.35μm | |
| Sensor level | Aptina1/2.3"CMOS | |
| Sensor Size | 6.1x4.6mm | |
| exposure time | 0.5ms-500ms | |
| gain | 1X-12X | |
| colourways | 3x8位=24位 | |
| data format | PC | JPG |
| video | MP4 | |
| operating system | Windows 7、Mac OS X | |
| software | PC | Leica LAS和LAS EZ software |
| MAC | Leica Acquire software | |
| Recommended Computer Configuration | PC/Mac，Intel Core 2 Duo | |
| >2.4GHz，4GB RAM,24-bit graphics card，1248x1024 | ||
| Leica DMS300 achromatic objective (0.8X, working distance 144mm) | ||
| Real time images (full HD) | DMS300@Zoom position | DMS300@Zoom position |
| resolution ratio | 142lp/mm | 24lp/mm |
| FoVx | 4.06mm | 32.44mm |
| FoVy | 2.28mm | 18.25mm |
| DoF | 0.178mm | 3.448mm |
| 10"monitor | 54.5X | 6.8X |
| 22"monitor | 120X | 15X |
| Electronic interface | ||
| computer | USB2.0，Standard B-type USB plug | |
| HD interface | HDMI1.3，Standard A-type HDMI plug | |
| audio frequency | Audio signals for recording, white balance, etc. (can be turned off) | |
| switch | have | |
| PC/HD switch | have | |
| Reset button | Display current resolution, transition to next resolution, reset, firmware upload | |
| remote control | RC2 infrared remote control, can be used in conjunction with the instrument, using CR2025 button battery | |
| Remote release (optional: 12730229) | Manual and foot trigger with 1.5m cable | |
| SD card (secure digital) | compatible SD HC,128MB-32GB | |
| LED status indicator light | 3 colors: green - power on, yellow - busy, red - error | |
| power supply | 5V，Connect to the computer or external USB through a USB cable | |
| Power requirements | 5W | |
| other | ||
| Operating temperature range | +10℃-50℃ | |
| relative humidity | 10%-90% | |
| CE Declaration of Conformity | have | |
| Testing standards | EN55011/EN61010-1/EN61326-1 | |
Linkenergy Metallographic Equipments Nanjing Co., Ltd. Copyright
Filing Number：苏ICP备12038434号-1
Hotline: (86)-186-0049-7749 E-Mail: info@linkenergy.cn
Tel: (86-25)-8622-2679 Fax: (86-25)-8653-2679
Address: Room 711-498, No. 116, Suo Street, Jianye District, Nanjing China 210000
Mobile Website
WeChat Account
